Alan had to laminate the Huon to achieve correct height for the rings.I turned these down to 7mm wall thickeness.
The two Bangles standing upright side by side lower right.
Huon pin
Wool 'n' Wood is a shared Blog for Sue's Crafts and Rays Wood and Steel projects. Sue has been knitting for many years and took on the crafts of spinning, weaving, dyeing and felting. Ray has always been into wood and steel and making and repairing things.
Wednesday, April 24, 2013
Pins & Bangles
Alan was making a box for a little girl which I became involved in, I made some ringed divider sections out of some beautiful Huon Birds Eye Burl Alan supplied. I decided during the making of those to also make a couple of additional bits. Some bangles/bracelets or shawl rings and hair pins/shawl pins. I had some Rosewood similar to that which Alan had used to make the body of the box.
Alan had to laminate the Huon to achieve correct height for the rings.
I turned these down to 7mm wall thickeness.
The two Bangles standing upright side by side lower right.
Huon pin
The Rosewood pins and bracelets.
Alan had to laminate the Huon to achieve correct height for the rings.I turned these down to 7mm wall thickeness.
The two Bangles standing upright side by side lower right.
Huon pin
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Your comments are welcome please forgive us if not replied to immediately.